【Brief introduction of goods】：
Large-scale lead free hot air reflow ovensTN380 Product explanation that,
Warm controls the system: Uses the PID intelligence microcomputer automatically to control heats.
Heating system: Uses the ceramics and the stainless steel heating device.
Transmission system: Uses exchange frequency conversion stepless speed regulation MOTOR and the turbulent flow reduction gear.
Alarm system: Uses the advanced indicating lamp automatic alarm.
Eight warm areas entire hot blast do not have the lead backflow TN380 product main characteristic:
A.Redundant reliability: Uses the high temperature to agglutinate gives off heat the primary device, the performance stably is reliable.
B.Flexible: Eight warm areas, may satisfy the general SMT welding request, at the same time may serve as solidifies the stove to make the solidification, does one machine two uses.
C.The price economy, the service life are long.
D.Satisfies the factory mass, multi- varieties production request and laboratory high accuracy scientific research trial manufacturing.
E.The main warm area uses forces the internal recycling heating system, the even hot blast spreads the stove cavity each quoin, guaranteed part being heated is even, does not shift.
Technical order that,
A:Controls warm Duan Shu: 8
B:Warm area number: 8
C:Controls the warm system: Each warm area all independently carries on PID by the Japanese intelligence microcomputer to be automatic warm controls; The SSR solid state relay does not have the electronic contact output
D:Warm controls the precision: ±2 ℃
E:Elevation of temperature time: 25min
F:Temperature range: Room temperature -360 ℃
G:Gives off heat the origin: Entire hot blast counter-flow way
H:In sets at the automatic time delay heating system, guaranteed the equipment starts when because instantaneous has flowed has pressed the damage stove controller or the electrical machinery, at the same time guarantees the primary device to weld time is not damaged
I:Conveyer belt: Stainless steel mesh belt
J:Conveyer belt width: 300mm
K:Transfer rate: Net belt transmission speed 0-1800mm/min may freely adjust
L:Alarm system: Indicating lamp or sound ultra warm auto-alarm
M:Protection system: Suddenly power cut may start the operation installment the PCB board to send out the stove in but does not damage the part and the work piece
N:Cooling system: Crossflow type balanced fast temperature decrease
O:On the chamber may open, the convenient chamber interior is clean
P:Power source:Three-phase four, 380V or 220V
Q:Maximum work rate:12KW
R:Weight: 420 kg
S:Size: The long * width * is high (3100*760*1360)