|
【Brief introduction of goods】：
The large-scale eight warm areas do not have the lead backflow to weld TN680C Product explanation that,
1: Heating system: The large-scale eight warm areas do not have the lead backflow to weld the TN680C heating system to use the highly effective energy conservation the nickel to iron the radiator pipe, the technological advance, the life are long-time. Torch is in sole possession of the hot blast circulatory system, causes PCB and the primary device being heated even, efficiency high, the elevation of temperature speed is quick.
2: Safekeeping of security system: Selects the big electric current bears the high pressure (450V) the SSR solid state relay not to have the electronic contact output, the security, is reliable, unifies the computer control system unique fuzzy control function and the data acquisition function, monitors in continuously the stove cavity the temperature and the calorific value change, gives off heat the component by the smallest pulse control, fast makes the response, in guaranteed warm controls the precision under the premise, but cannot because the big electric current voltage impact damage equipment, at the same time machine each group of greenhouses have all provided the high temperature pressure resistance protective tube, is the entire wrap system may the persistent effect safe reliable movement.
3: The industry special-purpose computer and the PID intelligence operation micromanipulator, through the PID intelligence operation, the accuracy control calorific capacity, and the fast response exterior quantity of heat change and is more balanced through the internal control guarantee temperature. The entire wrap system modulation design, will facilitate later the maintenance and the service disassembles and assembles.
4: The large-scale eight warm areas do not have the lead backflow to weld the TN680C outer covering and the furnace body may the automatic whole open, are advantageous for inside and outside the furnace body and the chamber are clean and the maintenance. |
|
【Remarks】：
The large-scale eight warm areas do not have the lead backflow to weld the TN680C product main characteristic:
A: Welding control: The large-scale eight warm areas do not have the lead backflow to weld the TN680C equipment The control system uses the advanced furnace temperature gathering system. When welding the test automation chamber temperature carries on the temperature curve test. At the same time the temperature curve may preserve or the printing.
B: Reliable steady transmission system: The large-scale eight warm areas do not have the lead backflow to weld the TN680C transmission system to use the quality reliable frequency conversion motor, the computer entire closed loop velocity modulation, coordinates 1: 100 turbine wheels decelerators, the movement are steady, speed 0 - 2000mm/min.
C:Stable reliable electricity control system:Time-delay switch protection function, after engine off even temperature decrease, prevents but to have the transmission part distortion and the heater damage because of the non-uniform temperature decrease.
D: The power failure protection function, after guarantees the power failure the PCB board normal output but not to send the damage. Windows operates the platform function formidable, the stability is high.
Technical order that,
A:Controls warm Duan Shu: 16/on 8/ next 8, the sur- group cools the supervisory system
B:Warm controls the precision:±2 ℃/temperature range:Room temperature -360 ℃
C:Gives off heat the origin:Entire hot blast microcycle hot blast counter-flow way
D:In sets at the automatic time delay heating system, guaranteed the equipment starts when because instantaneous has flowed has pressed the damage equipment controller or the electrical machinery, at the same time guarantees the primary device to weld time is not damaged
E:Conveyer belt: Stainless steel mesh belt/conveyer belt width:500mm
F:Transfer rate: 0-2000mm/min may freely adjust
G alarm system: Indicating lamp ultra warm auto-alarm
H:Cooling system: Crossflow type turbulent flow gentrifugalism air blower balanced fast temperature decrease
I:Power source:Three-phase four, 380V/ maximum work rate:18KW
J:Weight: 1600kg
K:Size:The long * width * is high (5300*1200*1460mm) |
