 |
| |
Browsing number of times：
|
|
| 【Trade name】：Full hot air Reflow Oven TN380C |
【Tel】：0086-10-51669522 |
| 【Manufacturer】：Torch Technology |
【Model】：TN380C |
【Introduction】：
★Temperature control system : automatic temperature control by PID intelligence microcomputer
★Heating system: ceramic and stainless steel heater
★Transmission system:AC conversion for adjusting the speed freely and vortex reducer
★Alarm system: automatic pilot light alarm
Features for TN380C：
A. High reliability, component make at high temperature, so the character is stable.
B.High agility, eight temperature-zones. It meets the requirement of SMT welding. It can be used as solidified stove at the same time.
C.Low price, long life
D.For the middle size, it can meets all requirements from customs.
|
|
|
【Remark】：
Technical instruction:
A: Temperature control segment: 16
B: Temperature-zone Number: upper 8/lower 8, cooling room, upper 1/lower 1
C: Temperature control system: automatic temperature control with PID intelligence microcomputer. SSR non-contact output
D:Temperature control accuracy:±2℃
E:Warm-up time : 25min
F:Temperature range: Room-temperature -360℃
G:Heating supply: full hot-air convection
H:Transmit Belt : Stainless steel netting belt.
I: Transmit Belt width : 300mm
J: Transmit Belt speed : 0-1600mm/Min free adjusting
K:Warning system :automatic warning with pilot light or sound when temperature is over.
L: Protection system: When power off suddenly, you can start special operation to send PCB out and will not be damaged.
M:Cooling system: 横流式均衡快速降温
N:Power Supply : three phase four wires三相四线,380V
O:Max power:24KW Average power: 23KW
P:Weight: 380kg
Q:Dimension Size : length* width * Height3500×900×1390mm |
|
